SLASHER 5SMBG(GALVANIZED HEAVY DUTY)

Slasher 5SMBG(Galvanized heavy duty)

  Unfortunately we are out of Stock and will not be stocking these models anymore. 

Print Friendly, PDF & Email

Slashers

The rugged Tasmanian landscape has been a great test on the range of Sansen Slashers over the past years and yes they have stood up to the testing environment.

Proven in reliability, wear and with the powder coat finish standing up to our harsh TAS weather.

The gearboxes  have proven to be outstanding with no reported issues since we started selling the range [ 2013] till now [ 12/2017].

We offer complete sales and backup so giving you peace of mind.

  • Comes complete with PTO shaft.
  • All heavy duty slashers including the galvanized type should have the following: Rear wheels are not included in standard price. Rear wheel kit :$250 each. Comes complete with rear solid heavy duty wheel and mounting bracket.
  • All heavy duty slashers come complete with rear solid heavy duty wheel, mounting bracket and valued at $275 each. The 6 and 7 foot slashers actually have 2 fitted valued at $550
  • This model comes fully assembled, checked over and gearboxes are all filled with oil.
  • This product can be picked up from Launceston or Hobart, no expensive freight from the main land.
  • Full 12 month warranty, except for on normal wearable usable parts, and 2 years on the gearbox under normal  operating conditions.
  • No assembly fee or oil charged. Professional assembly and  thoroughly checked over, so giving you the peace of mind.
  • Spare parts are readily available.

 

Features

    •  Suited for the Medium to large properties.
    • Manufactured with 5mm deck with an additional 6mm of plating under the gear box.
    •  45-50 hp/ 4 - 5 footer, 80- 85hp/6 & 7 foot heavy duty gearbox, Proven in quality over the years.
    • Supplied with PTO shaft which has the 7 [ 4 – 5foot] or 8 [ 6 to 7 foot] inch slip clutch fitted.
    • Fitted with a heavy duty cross bar and step down blades for added protection.
    • Flat top with reinforcing underneath. Finished with quality galvanized, including the skid rails.
    • Rear control chains from the top arm fitted, to allow for slashing on uneven ground.
    • Heavy duty adjustable skid rails to regulate cut height. Can be reversed to maximize wear.
    • Heavy duty front  attachment brackets and the ability to offset the slasher to either side.
    • Fitted with quality front, rear stone guards and PTO cover for your safety.
    • All fitted with the heavy duty rear wheel kit, 6 and 7 footer fitted with the dual wheels so protecting, prolonging the life of the slasher and giving them more versatility in operation.
    • After sales backup offered, with spare parts and years of experience with the famous Sansen brand.

 

Specifications

Model 4SMBG( 4 foot) 4.5SMGB(4.5 foot) 5SMGB(5 foot) 6SMGB(6 foot) 7SMGB(7 foot)
Horsepower 20-40hp 25-45hp 35-50hp 50-80hp 60- 90hp
Cut Width 118 mm 1330mm 1480mm 1800mm 2080mm
Cut Height 45 – 130mm 45 – 13 mm 45 – 130mm 45 – 13mm 45 – 130mm
Offset 125mm 125mm 125mm 125mm 125mm
Gear box 45hp 45hp 50hp 80hp 85hp
Deck thickness 5mm 5mm 5mm 5mm 5mm
Hitch pins CAT 1 CAT 1 CAT 1 CAT 1/2 CAT 1/2
PTO rpm 540 540 540 540 540
Overall width 1310mm 145mm 1600mm 1900mm 2220mm
Length 1720mm 190mm 2040mm 2300mm 2650mm
Weight approx 320 kg 378kg 385kg 570kg 700kg
Etc Complete with heavy duty rear wheel Complete with heavy duty rear wheel Complete with heavy duty rear wheel Complete with 2 x  heavy duty rear wheels Complete with 2 x  heavy duty rear wheels

* Specifications can change at any time, without notice, so please check with our staff to be sure